|
|
Standard Specifications
Driving Belt - "B" section V-belt.
Bed - Roller bed width between frames, 10", 13", 16" and
22". 5 1/2" x 1 1/2" x 12 gauge painted formed steel channel frame.
Tread Rollers - 1 3/8" diameter z 18 gauge galvanized steel tread
rollers, 5/16" hex shaft for 13" to 19" OAW. 2 1/2" to 1 11/16"
tapered roller for 25" OAW conveyor, 7/16" hex shaft.
Pressure Sheaves - 3" diameter x 3/8" bore, adjustable to give
required driving force.
Floor Supports - One support adjustable 30" to 44" from floor
to top of rollers. Center leg on outer rail of "138 CLRS".
Tangent - 12" long on one end of curved spur.
Take-Up - Screw take-up provided to ensure proper v-belt tension. Mounted
in conveyor frame.
End Drive - Mounted below bed section.
Bearing - Sealed prelubricated with cast iron housings.
Speed Reducer - C-Face mounted heavy duty worm gear reducer.
Motor - 1/2 HP 230/460-3-60 TE motor.
Conveying Speed - 60 FPM constant.
Capacity - 300 lbs. total distributed live load. See
Load Capacity Chart.
Acrobat Downloads 1
2
specifications chart | optional equipment | modifications |
|
