|
|
Standard Specifications
Driving Belt - 8" wide for 15" and 21"
between frames, 12" wide for 27" between frames, 16" wide for 33" and
39" between frames, black PVC 120 belt.
Bed - Roller bed width between rails, 15", 21", 27",
33" or 39". 7" x 1 1/2" x 12 gauge painted formed steel channel frame,
bolted together with butt couplings and floor supports.
Tread Rollers - 1.9" diameter x 16 gauge galvanized steel rollers
spaced on 3", 4 1/2", or 6" centers. Safety pop-out design prevents damage
to product or harm to personnel if caught between belt and tread rollers.
Pressure Rollers - 1.9" diameter x 16 gauge galvanized steel rollers
spaced on 6", 9", or 12" center, cam adjusted.
X-Bracing - Frame squaring device supplied on conveyors 40 feet and
longer on every other bed section. X-bracing insures good product and belt tracking.
Tail Pulley - 4" diameter crowned with 1 3/16" diameter shaft.
Drive Pulley - 8" diameter, crowned and fully lagged, with 1
7/16" diameter shaft.
Snub Roller - 2" diameter adjustable, located directly behind drive
pulley, and at each end directly behind terminal pulleys.
Return Roller - 1.9" diameter, adjustable, on 10'0" centers.
Floor Supports - Adjustable 31 1/2" to 45 1/2" from floor to
top of belt. One support supplied at each end of conveyor and at each bed joint.
Take-Up - Located in center drive, provides 24" of belt take-up.
Bearings - Sealed, prelubricated with cast iron housings.
Speed Reducer C-Face mounted heavy duty worm gear reducer
Motor - 1/2 HP 230/460-3-60 TE motor.
Belt Speed - 60 FPM constant.
Capacity - 150 pounds per foot. A Load Capacity Chart is available for download.
specifications chart
| optional equipment
modifications |
|
