|
|
Standard Specifications
Driving Belt - "B" section V-belt.
Bed - Roller bed width between frames, 15", 21" 27",
33" and 39". 2 1/2" diameter tapered to 1 11/16" diameter x 14 gauge
wall plated tread rollers. 7/16" hex shafts. Steel pressure sheaves. Mounted in
7" x 1 1/2" x 12 gauge painted steel channel frame.
Floor Supports - Adjustable 31 1/2" to 45 1/2" from floor to
top of rollers. One support at each end, and center leg on outer rail.
Take-Up - Screw take-up provided to insure proper V-Belt tension. Mounted
underneath conveyor.
Tangent - 12" long, one on each end.
End Drive - Mounted below bed section.
Bearings - Sealed prelubricated with cast iron housings.
Speed Reducer - C-Face mounted heavy duty worm gear reducer.
Motor - 1/2 HP 239/460-3-60 TE Motor.
Belt Speed - 60 FPM constant.
Capacity - 540 lbs. total distributed live load.
Acrobat Downloads 1
2
specifications chart
- acrobat chart |
optional equipment - acrobat file
modifications |
|
