|
|
Standard Specifications
Driving Belt - 3/16" diameter round urethane "O" rings from
drive shaft to tread rollers.
Bed - 7" x 1 1/2" x 12 gauge painted steel channel frame with
heavy duty cross braces and splice plates.
Rollers - 1.9" diameter x 6 gauge galvanized steel tread rollers
with 7/16" hex shaft and sealed, greased for life bearings, spaced on 3"
centers.
Floor Supports - Adjustable 31 1/2" to 45 1/2" from floor to
top of tread roller. Once support supplied at each end of conveyor and at each bed joint.
Drive - 2 foot module with motor and reducer. Drive module will be bolted
to intermediate section.
Drive Shaft - 1" diameter steel shaft, driven by motor and reducer,
runs full length of conveyor. Chain coupling supplied at bed joints to couple sections
together.
Drive Spools - Delrin spools located on drive shaft supplies driving
power to tread rollers.
Drive Shaft Bearings - Sealed, prelubricated, self aligning, precision
ball bearings on drive shaft.
Speed Reducer - Integral gear motor drive mounted underneath conveyor
with #50 roller chain connected to drive shaft.
Motor - 1/2 HP 230/460-3-60 TE motor.
Drive Guard - Expanded metal guard full length of conveyor covers drive
shaft and other moving drive components.
Conveying Speed - 60 FPM constant.
Capacity - 15 pounds tread roller maximum. See Load Capacity Chart
specifications chart | optional equipment | modifications
|
|
