|
|
Standard Specifications
Driving Belts - 3/16"
diameter round urethane "O" rings from drive shaft to tread rollers.
Bed - 7" x 1 1/2" x 12 gauge galvanized steel tread rollers
with heavy duty cross braces and splice plates.
Rollers - 1.9" diameter x 16 gauge galvanized steel tread rollers
with 7/16" hex shaft and sealed, greased for life bearings, spaced on 3"
centers.
Sensing Device - NEMA 1 photoelectric sensor in each sone detects the
presence of product and activates accumulation feature in the trailing zone if upstream
zone is occupied.
Power Supply - 120 VAC power supply controls accumulation feature with 24
VDC output. Power supply will control 100 accumulation zones.
Air Requirements - 35 to 40 psi recommended operating pressure with free
air consumption of .0062 cu. ft. per sensor operation.
Accumulation Zones - 24", 30" or 36" long, aire operated.
Conveyor frame length changes with zone lengths. Note: Zone length must be evenly
divisible by roller centers.
Filter/Regulator - Supplied loose for mounting to conveyor side frame.
Floor Supports - Adjustable 31 1/2" to 45 1/2" from floor to
top of tread roller. ONe support supplied at each end of conveyor and at each bed joint.
Drive - 2 foot module with motor and reducer. Drive module will be bolted
to intermediate section.
Drive Shaft - 1" diameter steel shaft, driven by motor and reducer,
runs full lenth of conveyor. Chain coupling supplied at bed joints to couple sections
together.
Drive Spools - Delrin spools lovated on drive shaft supplies driving
power to tread rollers.
Drive Shaft Bearings - Sealed, prelubricated, self aligning, precision
ball bearings on drive shaft.
Speed Reducer - C-Face mounted heavy duty worm gear reducer.
Motor - 1/2 HP 230/460/3/60 TE Motor.
Drive Guard - Expanded metal guard full lenth of conveyor covers drive
shaft and other moving drive components.
Conveying Speed - 60 FPM constant.
Capacity - Maximum load 15 lbs. per tread roller maximum. Not to exceed
the Load Capacity Chart as listed in our catalog.
specifications chart - acrobat
chart | optional equipment - acrobat file
modifications
|
|
