|
|
Standard Specifications
Belt Width - 12",
18", 24" and 36" wide, 1/2" x 1" flat wire belt.
Bed - 1.9" diameter rollers mounted on 6" centers in 6
1/2" deep x 12 gauge painted formed channel, bolted together with splice plates and
supports.
Drive Sprockets - 6" pitch diameter cast iron sprockets machined for
1 3/16" diameter shaft.
Tail Pulley - 4" diameter with 4" pitch diameter cast iron
sprockets on each end of pulley, 1 3/16" diameter shaft
Snub Roller Adjustable 2" diameter roller located directly behind
drive sprockets and tail sprockets.
Return Rollers - 1.9" diameter, adjustable, on 10'0" centers.
Take-Up - 6" long screws located at tail pulley to tighten belt.
Bearings - Sealed and pre-lubricated with heavy duty housing.
Floor Supports - Adjustable 31" to 45" from floor to top of
belt. One support supplied at each end of conveyor and at each bed joint.
Speed Reducer - C-Face mounted heavy duty worm gear reducer.
Motor - 1/2 HP 230/460-3-60 TE motor.
Belt Speed - 60 FPM constant.
Capacity - Maximum load per linear foot of conveyor - 75 lbs. See the
load capacity chart.
 Acrobat Download 1 2
specifications chart - acrobat chart | optional equipment - acrobat file
modifications |
|
