|
|
Standard Specifications
Drive Chain - #40 roller
chain on straight sections.
Bed - Conveying surface width 14", 16", 18", 24",
28" and 34". 3 1/2" x 1 1/2" x 10 gauge formed steel channel on chain
drive side. Sections are bolted together with butt couplings and floor supports.
Tread Roller - 2" diameter x 12 gauge steel with #40 sprockets
welded to roller tube, 7/16" hex shafts. Rollers spaced on 4", 6", 8"
and 12" centers. Rollers are roller to roller driven.
Chain Guard - Chain guard is mounted frame to totally enclose drive
chain.
Center Drive - Moutned unerneath conveyor, near center of section. Can be
placed most anywhere in conveyor length. Please specify location.
Floor Supports - Adjustable 28" to 42" from floor to top of
rollers. One supports supplied at each end of conveyor and at each bed joint.
Speed Reducer - C-Face mounted heavy duty worm.
Motor - 1/2 HP 230/460/3/60 TE motor.
Roller Speed - 60 FPM constant.
Conveyor Speed - 60 FPM constant. Some higher and lower speeds are
available. However, most efficient accumulation occurs at 60 FPM.
Capacity - Maximum load 150 lbs per foot. Maximum unit load. Not to
exceed Load Capacity Chart.
specifications chart | optional equipment
modifications |
|
