|
|
Standard Specifications
Driving Belt - Black PVC 120 belt.
Bed - Roller bed width between frames 27", 33", 39",
45", 51", 57", and 61", 7 1/2" x 1 1/2" x 7 gauge formed
steel channel frame bolted together with butt couplings and floor supports.
Tread Rollers - 2 1/2" diameter x 11 gauge or 2 5/8" diameter x
7 gauge, adjustable, both with 11/16" hex shaft mounted on 3", 4", or
6" centers. Safety pop-out design prevents damage to product or harm to personnel if
caught between belt and tread rollers.
Pressure Rollers - 2" diameter x 12 gauge steel pressure rollers.
Spaced every 6", 8" or 12" centers.
X-Bracing - Frame Squaring device supplied on conveyors 40 feet and
longer for every other bed section. X-bracing insures good product and belt tracking.
Tail Pulley - 8" diameter crowned with 1 7/16" diameter shaft.
Drive Pulley - 12" diameter crowned and fully lagged with 1
15/16" diameter shaft.
Snub Roller - 2 1/2" diameter adjustable.
Return Roller - 1.9" diameter, adjustable, on 10'0" centers.
Floor Supports - Adjustable 27 3/4" to 37 1/2" (HD-6) on
5'0" centers with knee braces.
Take-Up - Located in center drive, provides 12" of belt take-up.
Bearings - Sealed, prelubricated with cast iron housings.
Speed Reducer - C-Face mounted heavy duty worm gear reducer.
Motor - 2 HP 230/460-3-60 TE motor.
Conveyor Speed - 30 FPM constant.
Capacity - 450 pounds per foot maximum. See Load Capacity Chart.
specifications chart - acrobat chart | optional equipment - acrobat file
modifications |
|
