|
|
Standard Specifications
Bed - Conveying surface width 28", 34", 40", 46",
52", 58" and 64". 2 1/2" diameter x 11 gauge and 2 5/8" x 7 gauge
steel tread rollers, 11/16" hex shafts. #50 chain is used on 5", 7 1/2",
10" roller centers only. #60 chain is used on 6", 7 1/2" and 12"
centers only. Tread rollers mounted in 4" and 6" x 4 gauge formed steel channel
frame. Sections are bolted together with butt couplings and floor supports.
Drive Chain - #50 roller chain or #60 roller chain can be used with
either the 251CRR or 267CRR as above.
Floor Supports - Heavy duty supports are adjustable 30 1/4" to
40" from floor to top of roller. One support at every bed joint and each end of
conveyor.
Center Drive - Mounted underneath conveyor, center of section. Can be
placed most anywhere in conveyor length.
Bearings - Removable, sealed and prelubricated ball bearings.
Chain Guard - Lower chain guard is mounted on bottom of roller frame, and
upper chain guard is mounted above roller frame to totally enclose drive chain.
Speed Reducer - C-Face heavy duty worm gear reducer.
Motor - 3/4 HP 230/460/3/60 TE Motor.
Speed - 30 FPM constant.
Capacity - Maximum load per linear foot of conveyor is 300 lbs. with
supports on 10' centers and 1000 lbs. with supports on 5'0" centers.
optional equipment
modifications |
|
