|
|
Models "254SR" & "254SRC"
Frames - 3 1/2" deep x 1 1/2" flange x 10 gauge powder painted steel
with bolt-in cross members. Also available in 4" @ 5.4 lbs. structural channel frame,
optional. Rollers set 1/4" high.
Rollers - 2 1/2" diameter x 14 gauge steel tubing with swaged ends
to provide firm bearing seat. 2 1/2" to 1 11/16" tapered rollers available for
curves.
Bearings - Labyrinth sealed and grease packed, replaceable.
Axles - 7/16 hex shaft, spring loaded.
Couplings - Butt type, for bolting sections together.
Widths - From 13" between frames (B/F) and wider in two inch
increments up to 27" between frames. Also 31", 33", 37", 39",
45", 51" and 55" between frames.
Lengths - 10' and 5' straight sections.
Curve Degree - 45° and 90° with 2' 8 1/2" inside radius for widths
up to 27" between frames. 4'0" inside radius for 31", 33", 37",
39", 45", 51" and 55" between frames
Capacity - 350 lbs. per roller on narrow sizes, with 1,350 lbs. maximum
live load on 10' sections; 3,300 lbs. maximum live load on 5' sections.
specifications chart | modifications
|
|
