|
|
Models "267SR" & "267SRC" - Standard Specifications
Frames - 4" deep x 4 gauge channel with bolted cross members,
powder painted. Rollers set 1/4" high.
Rollers - 2 5/8" diameter x 7 gauge steel tubing with straight press
bearings.
Bearings - Labyrinth sealed and grease packed.
Axles - 11/16" hex shaft, spring-loaded.
Couplings - Splice plates, for bolting sections together.
Widths - From 13" between frames (B/F) and wider in two inch
increments up to 27" between frames. 4'0" inside radius for 31", 33",
37" and 39" between rails.
Lengths - 10' and 5' straight sections.
Curve Degree - 45° and 90° with 2' 8 1/2" inside radius for widths
up to 27" between frames. 4'0" inside radius for 31", 33", 37"
and 39" between frames. Tapered roller curves available.
Capacity - 800 lbs. per roller with 3,850 lbs. maximum distributed live
load over 10'; 8,100 lbs maximum distributed live load over 5' lengths. Curve sections
same as 10'. All capacities based on 3" centers.
specifications chart | modifications
|
|
