|
|
Air Operated Blade/Roller Stop
Capacity - Blade - 150 lbs., 1 3/8" roller - 50 lbs., 1.9" diameter
roller - 150 lbs. All are live load capacities at 60 FPM.
Bearings - High capacity (2) bolt flange bearings.
Stop - 1 3/8" diameter x 18 Gauge unplated steel roller for 1
3/8" conveyors. 1.9" diameter x 16 Gauge galvanized steel roller for
1.9" x 2.0" conveyors.
Blade - 1/4" steel plate
Position - Supplied normally down. Can be supplied normally up - Please
specify.
Air Cylinder - 1 1/4" bore x 2" stroke double acting air
cylinder to raise or lower stop.
Air Requirements - Minimum pressure is 60 PSI. Maximum
pressure is 100 PSI. Free air consumption a 60 PSI - .014 cu.ft. per cycle and 100 PSI -
.022 cu.ft. per cycle.
Valve - Single solenoid 4 way valve. 1/4" spring return - 20 NPT
valve ports.
Electrical Requirements - 120V, single phase, 60 Hz. Current
draw - .068 amps.
Installation Note: - To eliminate contaminants in air supply line, a
filter regulator (FR) should be installed prior to valve.
|
