|
|
Auto-Sort Air Operated Wheel Diverter
Capacity - 75 lbs. maximum package weight.
Package Size - Minimum 6" wide x 9" long. Maximum 25" wide
x 36" long.
Cycles - Up to 40 times per minute.
Speeds - Wheels 180 FPM
Mounting - Mounts in "190LS" conveyor. Being modular in design,
it can be located almost anywhere in the length of conveyor. Specify right hand or left
hand operation.
Diverting Wheels - Consists of a double row of 3" diameter wheels
spaced proportionately across conveor width. Driven by high capacity poly belts by its own
drive.
Supports - Minimum elevation is 21". Supports supplied for maximum
elevation of 43 1/2". Specify height conveyor will be installed.
Air Cylinder - 2" bore x 1" stroke double acting.
Air Requirements - Minimum pressure is 60 PSI. Maximum pressure is 125
PSI. Free aire consumption at 60 PSI - .018 cu. ft. per cycle.
Valve - Single solenoid 4 way valve. 1/4" - 20 NPT valve ports.
Electrical Requirements - 120V, single phase, 60 Hz. with current draw of
.07 amps.
Motor - 1/2 HP 230/460-3-60 TE motor.
Speed Reducer - Heavy duty worm gear, C-Face reducer.
Electrical Controls - Not furnished as standard equipment.
Installation Note:To eliminate contaminants in air supply line, a
filter regulator(FR) should be installed prior to valve.
|
