|
|
Hand Operated Blade/Roller Stop
Hand operated stops are used where manual line control is required such as assembly
work stations, shipping areas, etc. Can be mounted to underside of Models
"138SR", "190SR", "20SR", "190CAP",
"138CAP", and "190ZPA".
Capacity - Blade - 150 lbs., 1 3/8" diameter roller - 50 lbs.,
1.9" diameter roller - 150 lbs. All are live load capacities at 60 FPM.
Bearings - High capacity (2) bolt flange bearings.
Operation - Hand operated lever to raise or lower stop can be used in
normally up or down postitions.
Blade - 7 Gauge formed angle 1" x 1 1/2" for 1
3/8" conveyors - 1 1/2" for 1/9" and 2.0" conveyors.
Roller - 1 3/8" diameter x 18 Gauge galvanized steel roller for 1
3/8" conveyors. 1.9" diameter x 16 Gauge galvanized steel roller for 1.9"
and 2.0" conveyors.
Stroke - 2" above rollers.
|
