Automated Conveyor Systems, Inc.

MODEL “SBT”

Slider Bed Trash Conveyor

 

SBT

Applications / Features:

  • Adjustable floor supports
  • Incline to 15′
  • Guard rails
  • Economical

 

Online Resources:

 


STANDARD SPECIFICATIONS

Bed – 5-1/2″ deep x 14 gauge powder painted formed steel channel frame. Bed sections are 10 feet and 5 feet long, bolted together with splice plates and floor supports.
Belt – 12″, 18″, 24″, 30″, 36″, 42″ and 48″ wide, black PVC 120, FS x FS.
Guard Rail – 6″ high x 16 gauge formed, powder painted steel on both sides, full length of bed sections.
Underside Guards – Formed 16 gauge pans full length of bed sections, removable, secured with TEK screws.
Tail Pulley – 4″ or 6″ diameter (see chart) crowned with 1-3/16″ diameter shaft.
Drive Pulley – 4″, 6″ and 8″ diameter crowned and fully lagged. 4″ and 6″ diameter pulleys have 1-3/16″ diameter shaft, 8″ diameter pulley has 1-7/16″ diameter shaft.
Snub Rollerr – 2″ diameter (for 4″ and 6″ diameter drive pulleys), 2-1/2″ diameter (for 8″ diameter drive pulley).
Return Rollers – 1.9″ diameter placed on 10′ centers.
Floor Supports – Adjustable 30″ to 44″ from floor to top of belt. One floor support provided at each end of conveyor and at each bed joint.
Take-Up – 6″ long screws located at tail pulley to provide belt tension.
Bearings – Sealed, prelubricated with cast iron housings.
Speed Reducer – C-Face mounted heavy duty worm gear reducer.
Motor – 1/2 HP 230/460-3-60 TE motor.
Capacity – 10 pounds per foot maximum live load. See Load Capacity Chart.
(For Optional Equipment, Weight Specifications, and Engineering Line Drawings, please see catalog pages, above).

 

 

color chart
Optional ACSI Colors
(Optional colors available at extra cost)
 

OPTIONAL EQUIPMENT

Guard Rails – 12″, 18″, or 4″ high; vertical or 30 degree flare, for one or both sides.
Floor Supports – Higher than standard supports available to 121″.
Ceiling Hangers – 1⁄2″ diameter threaded rods, 8 feet long with locking nuts and mounting hardware.
Nose-Over – Fixed single nose-over at 10, 121⁄2 or 15 degrees. Adjustable nose-over roller for belt tracking.
Center Drive – Mounted below conveyor bed section. Can be placed most anywhere in conveyor length.
Auxiliary Belt Take-Up – Mounted below conveyor bed section. Can be placed most anywhere in conveyor length.
Side Mounted End Drive – Mounted to side of conveyor bed.
Minimum elevations: 4″ pulley – 7 1⁄2″, 6″ pulley – 8 1⁄2″, 8″ pulley -10 1⁄2″. Specify side.
Two Pulley Hitch – For transferring material from horizontal to incline section.
Inline Transfer Unit – For transferring material from one horizontal conveyor to another.
Belt – #100 PVC rough top belt for incline applications.
Belt Speed – 45, 75, 90 and 120 FPM. Please specify.
Motor – Single phase, energy efficient, explosion proof, etc. Other HP available.

Adjustable floor supports, Incline to 15, Guard rails, Economical

Custom
Conveyor Systems

With the flexibility you deserve!

Craftsmanship you can stand behind
Service that leads the way