|
|
Standard Specifications
Belt - 12", 14", 18", 24", 30" and 36" Black
PVC 120 belt.
Bed - 12 gauge painted formed steel, 6 1/2" deep. Bed sections are 5
feet and 10 feet long bolted together with splice plates and floor supports.
Tail Pulley - 4" diameter for belt widths throughout 30" wide.
6" diameter for 36" and wider belts. 4" diameter pulley has 1 3/16"
diameter shaft, 6" diameter pulley has 1 7/16" diameter shaft turned down on
ends to 1 3/16" diameter.
Drive Pulley - 8" diameter crowned and fully lagged with 1
7/16" diameter at tail pulley.
Snub Roller - 2 1/2" diameter directly behind drive pulley; 2"
diameter at tail pulley.
Return Roller - 1.9" diameter adjustable, on 10'0" centers.
Floor Supports - Adjustable 31" to 45" from floor to top of
belt. One supports supplied at each end of conveyors and at each bed joint.
Take-Up - 6" long screws located at tail pulley to provide belt
tension.
Bearings - Sealed-prelubricated with cast iron housings.
Speed Reducer - C-Face mounted heavy duty work gear reducer.
Motor - 1/2 HP 230/460-3-60 TE motor.
Belt Speed - 60 FPM constant.
Capacity - Maximum load per lineal foot of conveyor - 100 lbs. Not to
exceed Load Capacity Chart.
 Acrobat Downloads1 2
specifications chart | optional equipment
modifications - acrobat file - acrobat chart |
|
