|
|
Standard Specifications
Belt - 8",12",18", 20", 24"and 30", Black PVC belt.
Bed - 12 gauge painted formed steel, 4" deep. Bed sections are 5
feet and 10 feet long bolted together with splice plates and floor supports.
Tail Pulley - 4" diameter crowned with 1 3/16" diameter shaft.
Drive Pulley - 4" diameter and 8" diameter crowned and fully
lagged. 4" diameter pulley with 1 3/16" diameter shaft, 8" diameter pulley
with 1 7/16" diameter shaft.
Snub-Roller - 2" diameter for 4" diameter pulley, 2 1/2
diameter for 8" diameter pulley.
Return Roller - 1.9" diameter adjustable on 10'0" centers.
Floor Supports - Adjustable 28 1/2 to 42 1/2 from floor to top of belt.
One support supplied at each end of conveyor and at each bed joint.
Take-Up - 6" long screws located at tail pulley to provide belt
tension.
Bearings - Sealed-prelubricated with cast iron housings.
Speed Reducer - C-Face mounted heavy duty worm gear.
Motor - 1/2 HP 230/460-3-60 TE motor.
Belt Speed - 60 FPM constant.
Capacity - Maximum load per lineal foot of conveyor - 75 lbs. Not to
exceed Load Capacity Chart.
 Acrobat Downloads1 2
specifications chart - acrobat
chart | optional equipment - acrobat file
modifications |
|
