Automated Conveyor Systems, Inc.

MODEL “251CRR / 267CRR”

Heavy Duty Chain Driven Live Roller

Applications / Features:

  • Oily Conditions
  • Pallets
  • Drums
  • Positive Drive

 

Online Resources:

 


STANDARD SPECIFICATIONS

Bed – Conveying surface width 28″, 34″, 40″, 46″, 52″, 58″, and 64″. 2-1⁄2″ diameter x 11 gauge and 2-5⁄8″ x 7 gauge steel tread rollers, 11⁄16″ hex shafts.  No. 50 chain is used on 5″, 7-1⁄2″, 10″ roller centers only.  No. 60 chain is used on 6″, 7-1⁄2″, and 12″ centers only.  Tread rollers mounted in 4″ and 6″ x 4 gauge powder painted formed steel channel frame.  Sections are bolted together with butt couplings and floor supports.
Drive Chain
– No. 50 roller chain or No. 60 roller chain can be used with either the 251CRR or 267CRR as above.
Floor Supports
– Heavy duty supports are adjustable 30-1⁄4″ to 40″ from floor to top of roller.  One support at every bed joint and each end of conveyor.
Center Drive
– Mounted underneath conveyor, center of section.  Can be placed most any where in conveyor length.
Bearings
– Sealed, prelubricated ball bearings.
Chain Guard
– Lower chain guard is mounted on bottom of roller frame, and upper chain guard is mounted above roller frame to totally enclose drive chain.
Speed Reducer
– C-Face mounted heavy duty worm gear reducer.
Motor
– 3⁄4 HP 230/460-3-60 TE motor.
Speed
– 30 FPM.
Capacity
– Maximum load per linear foot of conveyor; 300 Ibs. with supports on 10′ centers, 1000 Ibs. with supports on 5’0″ centers.
(For Optional Equipment, Weight Specifications, and Engineering Line Drawings, please see catalog pages, above).

 

 

ACSI Paint Colors
Optional ACSI Paint Colors
(Optional colors available at extra cost)
 

OPTIONAL EQUIPMENT

Floor Supports – Lower or higher supports are available. Minimum elevation, 18″ from floor to top of rollers.

Side Mounted Drive – Motor-reducer unit can be mounted to side of conveyor frame. Drive is higher than conveyor frame. Minimum elevation to top of rollers is 7″.

Roller Set Low– 5”deep x 4 gauge non-driven side rail to provide 3⁄4″ high guard rail.

Motor-Single phase, energy efficient, explosion proof, etc. Other HP available.

Roller Speed-Constant and variable speeds available.

Electrical Controls – Magnetic starters and push button stations; manual motor starters with overload protection, others.

 

 

Oily, pallets, drums, positive,chain driven, cdlr

Custom
Conveyor Systems

With the flexibility you deserve!

Craftsmanship you can stand behind
Service that leads the way