MODEL "138CAP"
Light Duty Minimum Pressure
Accumulator
Light Duty Minimum Pressure
Accumulator
STANDARD SPECIFICATIONS
• Accumulates light boxes,
tote bins, baskets, etc.
• Miniumum back pressure
• Economical
tote bins, baskets, etc.
• Miniumum back pressure
• Economical
Applications / Features:
Driving Belt - 4" wide Black PVC 120 belt.
Bed - Roller bed width between frames, 10", 13", 16" and 22". 5-1⁄2" x 1-1⁄2" x 12 gauge powder painted formed steel channel frame, bolted together with butt couplings and floor supports.
Tread Rollers - 1-3⁄8" diameter x 18 gauge galvanized tread rollers with 5⁄16" hex shafts on 1-1⁄2" and 3" centers. Safety pop-out design prevents damage to product or harm to personnel if caught between belt and tread rollers.
Pressure Rollers - 1-3⁄8" diameter x 18 gauge galvanized pressure rollers with 5⁄16" hex shafts on 6" centers.
X-Bracing - Frame Squaring device supplied on conveyors 40 feet and longer on every other bed section. X-bracing insures good product and belt tracking.
Tail Pulley - 4" diameter crowned with 13⁄16" shaft.
Drive Pulley - 4" diameter crowned and fully lagged,with 1-3⁄16" diameter shaft. Located at infeed end of conveyor.
Snub Roller - 2" diameter adjustable, located directly behind drive and tail pulley.
Return Idler - 1.9" diameter, adjustable, on 10'0" centers.
Floor Supports - 30" to 44" adjustable from floor to top of rollers. One support supplied at each end of conveyor and at each bed joint.
Take-Up - Located at discharge end of conveyor, provides 12" of belt take-up.
Bearings - Sealed, prelubricated with cast iron housings.
Speed Reducer - Heavy duty worm gear reducer.
Motor - 1⁄2 HP 230/460-3-60 TE motor.
Belt Speed - 60 FPM constant.
Capacity - 100 pounds per foot. Not to exceed Load Capacity Chart.
(For Optional Equipment, Weight Specifications, and Engineering Line Drawings, please see catalog pages, above).
Bed - Roller bed width between frames, 10", 13", 16" and 22". 5-1⁄2" x 1-1⁄2" x 12 gauge powder painted formed steel channel frame, bolted together with butt couplings and floor supports.
Tread Rollers - 1-3⁄8" diameter x 18 gauge galvanized tread rollers with 5⁄16" hex shafts on 1-1⁄2" and 3" centers. Safety pop-out design prevents damage to product or harm to personnel if caught between belt and tread rollers.
Pressure Rollers - 1-3⁄8" diameter x 18 gauge galvanized pressure rollers with 5⁄16" hex shafts on 6" centers.
X-Bracing - Frame Squaring device supplied on conveyors 40 feet and longer on every other bed section. X-bracing insures good product and belt tracking.
Tail Pulley - 4" diameter crowned with 13⁄16" shaft.
Drive Pulley - 4" diameter crowned and fully lagged,with 1-3⁄16" diameter shaft. Located at infeed end of conveyor.
Snub Roller - 2" diameter adjustable, located directly behind drive and tail pulley.
Return Idler - 1.9" diameter, adjustable, on 10'0" centers.
Floor Supports - 30" to 44" adjustable from floor to top of rollers. One support supplied at each end of conveyor and at each bed joint.
Take-Up - Located at discharge end of conveyor, provides 12" of belt take-up.
Bearings - Sealed, prelubricated with cast iron housings.
Speed Reducer - Heavy duty worm gear reducer.
Motor - 1⁄2 HP 230/460-3-60 TE motor.
Belt Speed - 60 FPM constant.
Capacity - 100 pounds per foot. Not to exceed Load Capacity Chart.
(For Optional Equipment, Weight Specifications, and Engineering Line Drawings, please see catalog pages, above).
Horizontal Powered
STANDARD SPECIFICATIONS
Engineering Data
Inclined Powered
