STANDARD SPECIFICATIONS
MODEL "138CLR"
Light Duty V-Belt Driven Roller Curve
Light Duty V-Belt Driven Roller Curve
• Transports around turns
with positive drive
• Can be slave driven from
"138CAP"
with positive drive
• Can be slave driven from
"138CAP"
Applications / Features:
Driving Belt - "B" section V-belt.
Bed - Roller bed width between frames, 10", 13", 16" and 22". 5-1/2" x 1-1/2" x 12 gauge powder painted formed steel channel frame.
Tread Rollers - 1-3/8" diameter x 18 gauge galvanized steel tread rollers, 1-1/2" centers, 5/16" hex shaft for 13"-19" OAW. 2-1/2" to 1-11/16" tapered roller for 25" OAW conveyor, 7/16" hex shaft.
Pressure Sheaves - 3" diameter x 3/8" bore, adjustable to give required driving force.
Floor Supports - Adjustable 30" to 44" from floor to top of rollers. One support at each end, center leg on outer rail.
Tangent - 12" long, one on each end.
Take-Up - Screw take-up provided to insure proper V-belt tension. Mounted underneath conveyor.
End Drive - Mounted below bed section.
Bearings - Sealed prelubricated with cast iron housings.
Speed Reducer - C-Face mounted heavy duty worm gear reducer.
Motor - 1/2 HP 230/460-3-60 TE motor.
Conveying Speed - 60 FPM constant.
Capacity - 300 Ibs. total distributed live load.
(For Optional Equipment, Weight Specifications, and Engineering Line Drawings, please see catalog pages, above).
Bed - Roller bed width between frames, 10", 13", 16" and 22". 5-1/2" x 1-1/2" x 12 gauge powder painted formed steel channel frame.
Tread Rollers - 1-3/8" diameter x 18 gauge galvanized steel tread rollers, 1-1/2" centers, 5/16" hex shaft for 13"-19" OAW. 2-1/2" to 1-11/16" tapered roller for 25" OAW conveyor, 7/16" hex shaft.
Pressure Sheaves - 3" diameter x 3/8" bore, adjustable to give required driving force.
Floor Supports - Adjustable 30" to 44" from floor to top of rollers. One support at each end, center leg on outer rail.
Tangent - 12" long, one on each end.
Take-Up - Screw take-up provided to insure proper V-belt tension. Mounted underneath conveyor.
End Drive - Mounted below bed section.
Bearings - Sealed prelubricated with cast iron housings.
Speed Reducer - C-Face mounted heavy duty worm gear reducer.
Motor - 1/2 HP 230/460-3-60 TE motor.
Conveying Speed - 60 FPM constant.
Capacity - 300 Ibs. total distributed live load.
(For Optional Equipment, Weight Specifications, and Engineering Line Drawings, please see catalog pages, above).
Horizontal Powered
STANDARD SPECIFICATIONS
Engineering Data
Inclined Powered
