MODEL "190LSC / LSCS / LSS"
Line Shaft Live Roller
Curves and Spurs
Line Shaft Live Roller
Curves and Spurs
• 5 bed widths
• Slave driven from
Model "190LS"
• High speed capabilities
• Slave driven from
Model "190LS"
• High speed capabilities
Applications / Features:
Bed - Roller bed with 2-1⁄2" diameter tapered to 1-11⁄16" diameter x 14 gauge galvanized and 1.9" diameter x 16 gauge galvanized tread rollers. Mounted in 7" x 12 gauge powder painted formed steel channel frame.
Floor Supports - Adjustable 31-1⁄2" to 45-1⁄2" from floor to top of rollers. One support at ends of 190LSC (Curve), 190LSCS (Curve Spur) and 190LSS (Straight Spur). Single leg supplied for center of outside rail on 90° 190LSC only.
Slave Driven - Curves or spurs are slave driven from drive shaft of Model 190LS conveyor. Shafts are coupled by chain coupling at bed joints.
Drive Shaft - 1" diameter steel shaft extends full length of conveyor, coupled with universal joints ("U" joints) at necessary intervals.
Drive Spools - 2" diameter Delrin spool held in place on drive shaft with "snap-on" lock collars.
Drive Guard - Underside of drive shaft with spools and drive belts guarded full length of conveyor.
Drive Belts - 3⁄16" diameter urethane belt from drive spool to tread roller.
Bearings - Tread rollers, pre-lubricated ball bearings. Sealed, prelubricated, self-aligning ball bearings on drive shaft.
Butt Couplings - Standard for connecting to 190LS.
Capacity - See Load Capacity Chart.
(For Optional Equipment, Weight Specifications, and Engineering Line Drawings, please see catalog pages, above).
Floor Supports - Adjustable 31-1⁄2" to 45-1⁄2" from floor to top of rollers. One support at ends of 190LSC (Curve), 190LSCS (Curve Spur) and 190LSS (Straight Spur). Single leg supplied for center of outside rail on 90° 190LSC only.
Slave Driven - Curves or spurs are slave driven from drive shaft of Model 190LS conveyor. Shafts are coupled by chain coupling at bed joints.
Drive Shaft - 1" diameter steel shaft extends full length of conveyor, coupled with universal joints ("U" joints) at necessary intervals.
Drive Spools - 2" diameter Delrin spool held in place on drive shaft with "snap-on" lock collars.
Drive Guard - Underside of drive shaft with spools and drive belts guarded full length of conveyor.
Drive Belts - 3⁄16" diameter urethane belt from drive spool to tread roller.
Bearings - Tread rollers, pre-lubricated ball bearings. Sealed, prelubricated, self-aligning ball bearings on drive shaft.
Butt Couplings - Standard for connecting to 190LS.
Capacity - See Load Capacity Chart.
(For Optional Equipment, Weight Specifications, and Engineering Line Drawings, please see catalog pages, above).
STANDARD SPECIFICATIONS
Engineering Data
Inclined Powered
