Horizontal Powered
STANDARD SPECIFICATIONS
MODEL "190ZPA"
Medium Duty Zero Pressure Accumulator
Medium Duty Zero Pressure Accumulator
• Zero pressure accumulation
• Air operated zones
• Easy installation and
adjustment
• Economical
• Air operated zones
• Easy installation and
adjustment
• Economical
Applications / Features:
Driving Belt - Black PVC 120 belt.
Bed - Roller bed width between frames, 15", 21", 27", 33", and 39". 7" x 1-1/2" x 12 gauge powder painted formed steel channel frame, bolted together with butt couplings and floor supports.
Tread Rollers - 1.9" diameter x 16 gauge galvanized steel rollers spaced on 3" centers. Safety pop-out design prevents damage to product or harm to personnel if caught between belt and tread rollers.
Pressure Rollers- 1.9" diameter x 16 gauge galvanized steel rollers with 7/16" hex hhaft space on 6" and 12" centers. Raised by air to drive tread rollers, lowered when sensing device is activated.
Tail Pulley - 4" diameter crowned with 1-3/16" shaft.
Drive Pulley - 8" diameter crowned and fully lagged with 1-7/16" diameter shaft. Located at infeed end of conveyor.
Snub Roller - 2-1/2" diameter adjustable, located directly behind drive pulley. 2" diameter at each end directly behind terminal pulleys
Return Idlers - 1.9" diameter adjustable on 10'0" centers.
Floor Supports - 31-1/2" to 45-1/2" adjustable from floor to top of rollers. One support supplied at each end of conveyor and at each bed joint.
Sensing Roller - 1" diameter galvanized, mounted in counter balanced carriage, one for each zone.
Zones - Standard zones are 18", 24", 30", and 36" long.
Take-Up - Screw type take-up located at end of conveyor to maintain belt tension. 12" of belt take-up provided.
Bearings - Sealed and prelubricated with cast iron housings.
Speed Reducer - C-Face mounted heavy duty worm gear reducer.
Motor - 1/2 HP 230/460-3-60 TE motor.
Conveyor Speed - 60 FPM constant. Some higher and lower speeds available. However, most efficient accumulation occurs at 60 FPM.
Capacity - 150 pounds per foot max. unit load. Not to exceed Load Capacity Chart (see catalog page). For loads less than 5 pounds, consult factory.
(For Optional Equipment, Weight Specifications, and Engineering Line Drawings, please see catalog pages, above).
Bed - Roller bed width between frames, 15", 21", 27", 33", and 39". 7" x 1-1/2" x 12 gauge powder painted formed steel channel frame, bolted together with butt couplings and floor supports.
Tread Rollers - 1.9" diameter x 16 gauge galvanized steel rollers spaced on 3" centers. Safety pop-out design prevents damage to product or harm to personnel if caught between belt and tread rollers.
Pressure Rollers- 1.9" diameter x 16 gauge galvanized steel rollers with 7/16" hex hhaft space on 6" and 12" centers. Raised by air to drive tread rollers, lowered when sensing device is activated.
Tail Pulley - 4" diameter crowned with 1-3/16" shaft.
Drive Pulley - 8" diameter crowned and fully lagged with 1-7/16" diameter shaft. Located at infeed end of conveyor.
Snub Roller - 2-1/2" diameter adjustable, located directly behind drive pulley. 2" diameter at each end directly behind terminal pulleys
Return Idlers - 1.9" diameter adjustable on 10'0" centers.
Floor Supports - 31-1/2" to 45-1/2" adjustable from floor to top of rollers. One support supplied at each end of conveyor and at each bed joint.
Sensing Roller - 1" diameter galvanized, mounted in counter balanced carriage, one for each zone.
Zones - Standard zones are 18", 24", 30", and 36" long.
Take-Up - Screw type take-up located at end of conveyor to maintain belt tension. 12" of belt take-up provided.
Bearings - Sealed and prelubricated with cast iron housings.
Speed Reducer - C-Face mounted heavy duty worm gear reducer.
Motor - 1/2 HP 230/460-3-60 TE motor.
Conveyor Speed - 60 FPM constant. Some higher and lower speeds available. However, most efficient accumulation occurs at 60 FPM.
Capacity - 150 pounds per foot max. unit load. Not to exceed Load Capacity Chart (see catalog page). For loads less than 5 pounds, consult factory.
(For Optional Equipment, Weight Specifications, and Engineering Line Drawings, please see catalog pages, above).
Note:
Shown with
Optional Side
Mounted Drive
Shown with
Optional Side
Mounted Drive
STANDARD SPECIFICATIONS
Engineering Data
Inclined Powered
