STANDARD SPECIFICATIONS
MODEL "251 / 267CAP"
Minimum Pressure Accumulator
Minimum Pressure Accumulator
• Heavy Duty conveying
• Limited accumulation
• Rugged design
• Easy installation &
adjustment
• Limited accumulation
• Rugged design
• Easy installation &
adjustment
Applications / Features:
Driving Belt - Black PVC 120 belt.
Bed - Roller bed width between frames, 27", 33", 39", 45", 51", 57", and 61". 7-1/2" x 1-1/2" x 7 gauge powder painted formed steel channel frame, bolted together with butt couplings and floor supports.
Tread Rollers - 2-1/2" diameter x 11 gauge or 2-5/8" diameter x 7 guage, adjustable, both with 11/16" hex shaft mounted on 3", 4", or 6" centers. Safety pop-out design prevents damage to product or harm to personnel if caught between belt and tread rollers.
Pressure Rollers- 2" diameter x 12 gauge steel pressure rollers spaced on 6", 8", or 12" centers.
X-Bracing - Frame Squaring device supplied on conveyors 40 feet and longer on every other bed section. X-bracing insures good product and belt tracking.
Tail Pulley - 8" diameter crowned with 1-7/16" diameter shaft.
Drive Pulley - 12" diameter crowned and fully lagged with 1-15/16" diameter shaft.
Snub Roller - 2-1/2" diameter adjustable.
Return Idlers - 1.9" diameter adjustable on 10'0" centers.
Floor Supports - 27-3/4" to 37-1/2" (HD-6) adjustable on 5'-0" centers with knee braces. One support supplied at each end of conveyor and at each bed joint.
Take-Up - Located in center drive, provides 12" of belt take-up.
Bearings - Sealed and pre-lubricated with cast iron housings.
Speed Reducer - C-Face mounted heavy duty worm gear reducer.
Motor - 2 HP 230/460-3-60 TE motor.
Belt Speed - 30 FPM constant.
Capacity - 450 pounds per foot. Not to exceed Load Capacity Chart (see catalog page).
(For Optional Equipment, Weight Specifications, and Engineering Line Drawings, please see catalog pages, above).
Bed - Roller bed width between frames, 27", 33", 39", 45", 51", 57", and 61". 7-1/2" x 1-1/2" x 7 gauge powder painted formed steel channel frame, bolted together with butt couplings and floor supports.
Tread Rollers - 2-1/2" diameter x 11 gauge or 2-5/8" diameter x 7 guage, adjustable, both with 11/16" hex shaft mounted on 3", 4", or 6" centers. Safety pop-out design prevents damage to product or harm to personnel if caught between belt and tread rollers.
Pressure Rollers- 2" diameter x 12 gauge steel pressure rollers spaced on 6", 8", or 12" centers.
X-Bracing - Frame Squaring device supplied on conveyors 40 feet and longer on every other bed section. X-bracing insures good product and belt tracking.
Tail Pulley - 8" diameter crowned with 1-7/16" diameter shaft.
Drive Pulley - 12" diameter crowned and fully lagged with 1-15/16" diameter shaft.
Snub Roller - 2-1/2" diameter adjustable.
Return Idlers - 1.9" diameter adjustable on 10'0" centers.
Floor Supports - 27-3/4" to 37-1/2" (HD-6) adjustable on 5'-0" centers with knee braces. One support supplied at each end of conveyor and at each bed joint.
Take-Up - Located in center drive, provides 12" of belt take-up.
Bearings - Sealed and pre-lubricated with cast iron housings.
Speed Reducer - C-Face mounted heavy duty worm gear reducer.
Motor - 2 HP 230/460-3-60 TE motor.
Belt Speed - 30 FPM constant.
Capacity - 450 pounds per foot. Not to exceed Load Capacity Chart (see catalog page).
(For Optional Equipment, Weight Specifications, and Engineering Line Drawings, please see catalog pages, above).
Horizontal Powered
STANDARD SPECIFICATIONS
Engineering Data
Inclined Powered
