STANDARD SPECIFICATIONS
Capacity - 75 Ibs. max. package weight.
Package Size - Min. 6" wide x 9" long, max. 25" wide x 36" long.
Cycles - Up to 40 times per minute.
Speeds - Wheels 180 FPM.
Mounting - Mounts in "190LS" conveyor. Being modular in design, it can be located almost anywhere in length of conveyor. Specify right hand or left hand operation.
Diverting Wheels - Consists of a double row of 3" diameter wheels spaced proportionately across conveyor width. Driven by high capacity poly belts by it's own drive. May also be slave driven- consult factory.
Supports - Minimum elevation 21". Specify height conveyor will be installed.
Air Cylinder - 2" bore x 1" stroke double acting.
Air Requirements - Min. pressure 60 PSI, maximum 125 PSI. Free air consumption @ 60 PSI - .018 cu.ft.per cycle.
Valve - Single solenoid 4 way valve. 1⁄4"- 20 NPT valve ports.
Electrical requirements -120V, single phase, 60 Hertz, current draw .07 amps, or 24VDC.
Motor - 1⁄2 HP 230/460-3-60 TE motor.
Speed Reducer - Heavy duty worm gear, C-Face.
Electrical Controls - Not furnished as standard equipment.
INSTALLATION NOTE: To eliminate contaminants in air supply line, a filter, regulator,
(FR) should be installed prior to valve.
Package Size - Min. 6" wide x 9" long, max. 25" wide x 36" long.
Cycles - Up to 40 times per minute.
Speeds - Wheels 180 FPM.
Mounting - Mounts in "190LS" conveyor. Being modular in design, it can be located almost anywhere in length of conveyor. Specify right hand or left hand operation.
Diverting Wheels - Consists of a double row of 3" diameter wheels spaced proportionately across conveyor width. Driven by high capacity poly belts by it's own drive. May also be slave driven- consult factory.
Supports - Minimum elevation 21". Specify height conveyor will be installed.
Air Cylinder - 2" bore x 1" stroke double acting.
Air Requirements - Min. pressure 60 PSI, maximum 125 PSI. Free air consumption @ 60 PSI - .018 cu.ft.per cycle.
Valve - Single solenoid 4 way valve. 1⁄4"- 20 NPT valve ports.
Electrical requirements -120V, single phase, 60 Hertz, current draw .07 amps, or 24VDC.
Motor - 1⁄2 HP 230/460-3-60 TE motor.
Speed Reducer - Heavy duty worm gear, C-Face.
Electrical Controls - Not furnished as standard equipment.
INSTALLATION NOTE: To eliminate contaminants in air supply line, a filter, regulator,
(FR) should be installed prior to valve.
MODEL "Auto-Sort Air Operated Wheel Diverter"
Installation Manual
STANDARD SPECIFICATIONS
Engineering Data
Inclined Powered
