|
|
Pneumatic Push-Off
The pneumatic push-off is used for 90° transfers when package
specifications allow product to be pushed from side. Can also be used to divert packages
from one lane to another in parallel conveyor lanes.
Capacity - 300 lbs. maximum package weight
Pusher Face - 18" long
Pusher Stroke - 20" to 30"
Cycles - Up to 40 times per minute, up to 24" stroke only, at 80
PSI.
Air Cylinder - 2" bore double acting, automatic return
Air Requirements - Minimum pressure is 60 PSI, maximum is 125 PSI. Free
air consumption at 60 PSI - .105 cu.ft. per cycle for 20" stroke, .176 cu.ft. for
30" stroke.
Valve - Single solenoid 4 way, automatic return valve, 1/2" - NPT
valve ports.
Electrical Requirements - 120V, single phase, 60 Hz. Current draw - .07
amps
Electrical Controls - PLC furnished
Installation Note: - To eliminate contiminants in air supply line, a
filter regulator (FR) should be installed prior to valve.
|
|
