|
|
Standard Specifications
Bed - 5 1/2" deep x 14 gauge painted formed
steel channel frame. Bed section are 10 feet and 5 feet long, bolted together with
splice plates and floor supports.
Belt - 12", 18", 24", 30", 36", 42", and
48" wide, black PVC 90, FS top side, brushed bottom side, with clipper lacing.
Guard Rail - 6" high x 16 gauge formed, painted steel on both sides,
full length of bed sections.
Underside Guards - Formed 16 gauge pans full length of bed sections,
removable, secured with TEK screws.
Tail Pulley - 4" diameter crowned with 1 3/16" diameter shaft.
Drive Pulley - 4", 6", and 8" diameter crowned and fully
lagged. 4" and 6" diameter pulleys have 1 3/16" diameter shaft, 8"
diameter pulley has 1 7/16" diameter shaft.,
Snub Roller - 2" diameter for 4" and 6" diameter pulleys,
2 1/2" diameter for 8" diameter pulley.
Return Rollers - 1.9" diameter placed on 10 feet centers.
Floor Supports - Adjustable 30" to 44" from floor to top of
belt. One floor support provided at each end of conveyor and at each bed joint.
Take-Up - 6" long screws at tail pulley to provide belt tension.
Bearings - Sealed, prelubricated with cast iron housings.
Speed Reducer - C-Face mounted heavy duty worm gear reducer.
Motor1/2 HP 230/460-3-60 TE motor.
Capacity - 10 pounds per foot maximum live load. Load Capacity Charts are available in the pdf download listed below.
 Acrobat Download 1 2
specifications chart - acrobat
chart | optional equipment - acrobat file
modifications |
|
