|
|
Standard Specifications
Belt - 8", 12",
18", 20", 24", and 30" Black PVC belt.
Bed - 12 gauge painted formed steel with 2 1/2" high vertical sides bolted to
top of bed. Standard sections are 5 and 10 feet long bolted together with floor supports
and splice plates.
Tail Pulley - 4" diameter crowned with 1 3/16" diameter shaft.
Drive Pulley - 4" diameter and 8" diameter crowned and fully lagged.
4" diameter pulley with 1 3/16" diameter shaft, 8" diameter pulley with 1
7/16" diameter shaft.
Snub-Roller - 2" diameter for 4" diameter pulley, 2 1/2" diameter
for 8" diameter pulley.
Rturn Idler - 1.9" diameter adjustable, on 10'0" centers.
Floor Supports - Adjustable 28 1/2" to 42 1/2" from floor to top of belt.
One support supplied at each end of conveyor and at each bed joint.
Take-Up - 6" long screws located at tail pulley to provide belt tension.
Bearings - Sealed-prelubricated with cast iron housings.
Speed Reducer - C-Face mounted heavy duty worm gear reducer.
Motor - 1/2 HP 230/460-3-60 TE motor.
Belt Speed - 60 FPM constant.
Capacity - Maximum load per lineal foot of conveyor - 100 lbs. Not to exceed Load
Capacity Chart.
specifications chart - acrobat
chart | optional equipment - acrobat file
modifications |
|
