Applications / Features
- ►Heavy duty driven rail with rollers set low.
- ►Positive drive
- ►Pallets
- ►Heavy drums
- ►Reversible drums
Online Resources
Super Heavy Duty Gravity Roller Bed Conveyor
Standard Specifications
Bed — Conveying surface width 19", 27", 29", 33", 41", 47", 53" and 55". 6" x 8.2 lb. and 8" x 11.5 lb. powder painted structural channel frame with powder painted structural channel cross braces in each section. Sections are 5 feet long and bolted together with butt couplings and floor supports.
Tread Rollers — 3½" diameter x .30 wall steel tread rollers spaced on 6" or 12" centers, No. 80 sprockets, 11⁄16" hex shaft.
Drive Chain — No. 80 roller chain.
Floor Supports — Heavy duty structural supports are fixed at 18" elevation from floor to top of roller. One support at each end of conveyor and at each bed joint.
Center Drive — Mounted below conveyor bed section. Can be placed most anywhere in conveyor length.
Bearings — Removable, sealed, prelubricated ball bearings.
Chain Guard — Lower chain guard is mounted on bottom of roller frame, and upper chain guard is mounted above roller frame to to- tally enclose drive chain.
Speed Reducer — C-Face mounted heavy duty worm gear reducer.
Motor — 2 HP 230/460-3-60 TE motor.
Capacity — 2000 Ibs. per foot maximum. Not to exceed Load Ca- pacity Chart.
Speed — 30 FPM constant.
Optional Equipment
- ►Floor Supports - Lower or higher supports are available.
- ►Side Mounted Drive - Center drive mounted to side of conveyor frame. Drive is higher than conveyor frame. Minimum elevation to top of rollers is 103⁄8". Specify which side.
- ►Rollers Set Low - Tread rollers set low in 8" x 11.5 pound structural steel channel frame to form 15⁄8" high guards.
- ►Motor - Single phase, energy efficient, explosion proof, etc. Other HP available.
- ►Electrical Controls - Magnetic starter and push button stations; manual motor starters with overload protection, others.
- ►Speed - Constant and variable speeds available.