Model “190CLRSS” Medium Duty V-Belt Driven Straight Spur Conveyor

Driving Belt — “B” section V-belt.

Bed — Roller bed width between frames, 15", 21", 27", 33" and 39". 2-1/2" diameter tapered to 1-11/16" diameter x 14 gauge wall plated tread rollers. 7/16" hex shafts. Steel pressure sheaves. Mounted in 7" x 1-1/2" x 12 gauge powder painted formed steel channel frame.

Floor Supports — Adjustable 31-1/2" to 45-1/2" from floor to top of rollers. One support at each end, and center leg on outer rail.

Tangent — 12" long, one on each end, rollers on 3” centers.

End Drive — Mounted below bed section.

Bearings — Sealed prelubricated with cast iron housings.

Speed Reducer — C-Face mounted heavy duty worm gear reducer.

Motor — ½ HP 230/460-3-60 TE motor.

Belt Speed — 60 FPM constant.

Capacity — 540 Ibs. total distributed live load.

Guard Rails — Adjustable channel, continuous channel, steel guard rails available.

Floor Supports — Lower or higher supports are available. Minimum elevation, 17" from floor to top of rollers.

Ceiling Hangers — ½" diameter threaded rods 8 feet long with locking nuts and mounting hardware. Other lengths are available.

Side Mounted Drive — End drive mounted to side of conveyor bed section. Minimum elevation 9-1/2". Specify side.

Motor — Single phase, energy efficient, explosion proof, etc. Other HP available.

Belt Speed — Constant and variable belt speeds available.

Electrical Controls — Magnetic starters and push button stations; manual motor starters with overload protection, others.

Tangents — Standard tangents are 12" long, located at each end of curve. Longer tangents available. Contact Factory.