Model “190RB”

Belt — 12", 18", 24", 30", 36", 42" and 48" Black PVC 120 belt.

Bed — Roller bed with 1.9" diameter galvanized steel rollers. Rollers spaced on 6" centers. Rollers mounted in 7" deep x 12 gauge powder painted formed steel channel frames. Frames bolted together with butt couplings and floor supports.

Drive Pulley — 8" diameter crowned and fully lagged, 17/16" shaft.

Tail Pulley — 4" diameter crowned supplied through 30" wide belts. 6" diameter crowned supplied for 36" and wider belts. 4" diameter pulley has 13⁄16" diameter shaft; 6" diameter pulley has 17/16" diame- ter shaft.

Snub Roller — 2½" diameter adjustable roller, Iocated directly be- hind drive pulley, 2" diameter located behind tail pulley.

Return Rollers — 1.9" diameter adjustable on 10'0" centers.

Bearings — Sealed-prelubricated with cast iron housings.

Floor Supports — Adjustable 315⁄8" to 455⁄8" from floor to top of belt. One support supplied at each end of conveyor and at each bed joint.

Speed Reducer — C-Face mounted heavy duty worm gear reducer.

Motor — ½ HP 230/460-3-60 TE motor.

Belt Speed — 60 FPM constant.

Capacity — 200 pounds per foot maximum. Not to exceed Load Capacity Chart.

Belt — Nitrile (white or black) with smooth top cover, Black PVC rough top, Brown Nitrile rough top. Special belts on application.

Roller Centers — 1.9" diameter galvanized steel rollers spaced on 3", 4½", 9" or 12" centers.

Guard Rails — Adjustable channel, continuous channel, or solid steel guard rails available.

Floor Supports — Lower or higher than standard. Castered sup- ports with 4" diameter or 6" diameter rigid or swivel casters.

Ceiling Hangers — ½" diameter threaded rods 8 feet long with locking nuts and mounting hardware. Other lengths are available.

Side Mounted Drive — End drive mounted to side of conveyor section. Specify side. Minimum elevation – 10".

Center Drive — Mounted below conveyor bed section. Can be placed most anywhere in conveyor length.

Motor — Single phase, energy efficient, explosion proof, etc. Other HP available.

Belt Speed — Constant and variable belt speeds available.

Electrical Controls — Magnetic starters and push button stations; manual motor starters with overload protection, others.

Power Feeder — Separate belt section with (2) MD-6 (28½" to 42½" adjustable) supports. Feeder driven by roller chain from main conveyor. Auxiliary take-up required on inclined conveyor. Integral feeder available.