Model "190RBI" Inclined Roller Bed Belt Conveyor

Belt — 12", 16", 18", 20", 24" and 30" wide black PVC 120 rough-top belt.

Bed — Roller bed with 1.9" diameter x 16 gauge galvanized rollers spaced on 6" centers. Rollers mounted in 7" x 1-1/2" x 12 gauge powder painted formed steel channel frames. Frames bolted together with butt couplings.

Under-Trussed Bed — Extra reinforcement to prevent sag in longer bed sections, in addition to reinforcing angles, 20 feet and longer.

X-Bracing — Supplied on conveyors 40 feet and longer. Used to square bed sections to ensure proper product and belt tracking.

Double Nose-Over — Adjustable from 0° to 30°.

Center Drive — Mounted below conveyor bed section. Can be placed most anywhere in conveyor length.

Tail Pulley — 4" diameter crowned with 1-3/16" diameter shaft through 30" wide belt. 6" diameter tail pulley with 1-7/16" diameter shaft for wider than 30" belt.

Drive Pulley — 8" diameter and fully lagged, 1-7/16" diameter shaft.

Snub Roller — 2-1/2" diameter at drive pulley, 2" diameter at terminal pulleys.

Return Roller — 1.9" diameter.

Take-Up — Located in center drive, provides 24" of belt take-up.

Gravity Brackets — Adjustable rod with 1-3/8" diameter pop-out transfer roller to attach wheel or 1-3/8" diameter roller conveyor.

Bearings — Sealed, prelubricated with cast iron housings.

Floor Supports — Adjustable 31-5/8" to 45-5/8" from floor to top of belt. One support supplied at each end of conveyor and at nose-over, with knee braces.

Speed Reducer — C-Face mounted heavy duty worm gear reducer.

Motor — 3/4 HP 230/460-3-60 TE motor.

Belt Speed — 60 FPM constant.

Capacity — See Load Capacity Chart (60 FPM, 25° incline, 50' OAL max.): 3/4 HP 450 lbs.; 1 HP 675 lbs.; 1-1/2 HP 1125 lbs.; 2 HP 1345 lbs.

Belt — Neoprene ruff-top and other types and styles; contact factory.

Guard Rails — Adjustable channel, continuous channel, or solid steel guard rails available.

Ceiling Hangers — 1/2" diameter threaded rods 8 feet long with locking nuts and mounting hardware. Other lengths are available.

Floor Supports — Lower or higher than standard.

Lower Powered Feeder Section — Separate belt section with (2) supports, adjustable from 28-1/4" to 42-1/4". Driven by roller chain from tail pulley of inclined section. Integral feeders available.

Single Nose-Over — Available.

Motor — Single phase, energy efficient, explosion proof, etc. Other HP available.

Belt Speed — Constant and variable belt speeds available.

Electrical Controls — Magnetic starters, push button stations; manual motor starters with overload protection, others.