Model “350CRR” Heavy Duty Chain Driven Live Roller
Heavy Duty Chain Driven Live Roller
ACSI Model 350CRR is a heavy-duty chain-driven live roller conveyor for transporting compatible pallets, heavy drums, and other high-capacity unit loads. Its structural-channel frame, 3.5-inch rollers, and positive roller-to-roller chain drive support demanding reversible transport applications where lighter conveyor construction is not sufficient. With properly spaced supports, the model carries up to its published 2,000 pounds per linear foot and anchors ACSI’s heavy-duty pallet handling range.
Standard Specifications
Bed — Conveying surface width 19”, 27”, 29”, 33”, 41”, 47”, 53”, and 55”. 6” x 8.2 lb. and 8” x 11.5 lb. powder painted structural channel frame with powder painted structural channel cross braces in each section. Sections are 5 feet long and bolted together with butt couplings and floor supports.
Tread Rollers — 3-1/2” diameter x .30 wall steel tread rollers spaced on 6” or 12” centers, No. 80 sprockets, 1-1/16” hex shaft.
Drive Chain — No. 80 roller chain.
Floor Supports — Heavy duty structural supports are fixed at 18” elevation from floor to top of roller. One support is provided at each end of conveyor and at each bed joint.
Center Drive — Mounted below conveyor bed section. Can be placed most anywhere in conveyor length.
Bearings — Removable, sealed, prelubricated ball bearings.
Chain Guard — Lower chain guard is mounted on bottom of roller frame, and upper chain guard is mounted above roller frame to totally enclose drive chain.
Speed Reducer — C-Face mounted heavy duty worm gear reducer.
Motor — 2 HP 230/460-3-60 TE motor.
Capacity — 2,000 lbs. per foot maximum. Not to exceed Load Capacity Chart.
Speed — 30 FPM constant.
For optional equipment, weight specifications, and engineering line drawings, please see the catalog pages.
Optional Equipment
Floor Supports — Lower or higher supports are available.
Side Mounted Drive — Center drive mounted to side of conveyor frame. Drive is higher than conveyor frame. Minimum elevation to top of rollers is 10-3/8”. Specify which side.
Rollers Set Low — Tread rollers set low in 8” x 11.5 lb. structural steel channel frame to form 1-5/8” high guards.
Tread Rollers — 3-1/2” diameter x.30 wall steel tread rollers spaced on 6” or 12” centers, No. 60 sprockets, 1-1/16” hex shaft.
Drive Chain — No. 60 roller chain.
Motor — Single phase, energy efficient, explosion proof, etc. Other HP available.
Electrical Controls — Magnetic starters and push button stations; manual motor starters with overload protection, others.
Speed — Constant and variable speeds available.
Applications / Features
- ►Heavy Duty Conveying
- ►Positive Drive
- ►Pallets
- ►Heavy Drums
- ►Reversible Operation
Online Resources
Confirm the Model Fits Your Application.
Share the product and load data, conveyor dimensions, speed, throughput, controls, layout, and operating conditions. ACSI manufactures the equipment, and our distributors provide system integration and installation.