Model "HPB" Heavy Duty Slider Bed Belt Conveyor
Heavy Duty Slider Bed Belt Conveyor
ACSI Model HPB is a heavy-duty slider bed belt conveyor for demanding horizontal transport and work-process applications. Its continuously supported belt provides a stable surface for packing, inspection, sorting, assembly, testing, and movement of compatible unit loads. The deeper frame and higher published capacity distinguish the HPB from the medium-duty LPB when the product, duty cycle, or application calls for a more substantial conveyor.
12″–36″ belt widths · 100 lb/ft capacity · 60 FPM · ½ HP motor
Standard Specifications
Belt — 12″, 14″, 18″, 24″, 30″ and 36″ Black PVC 120 belt.
Bed — 12 gauge powder painted formed steel, 6-1/2″ deep. Bed sections are 5 feet and 10 feet long, bolted together with splice plates and floor supports.
Tail Pulley — 4″ diameter for belt widths through 30″ wide; 6″ diameter for 36″ and wider belts. 4″ diameter pulley has 1-3/16″ diameter shaft; 6″ diameter pulley has 1-7/16″ diameter shaft.
Drive Pulley — 8″ diameter crowned and fully lagged with 1-7/16″ diameter shaft.
Snub Roller — 2-1/2″ diameter directly behind drive pulley; 2″ diameter at tail pulley.
Return Roller — 1.9″ diameter adjustable, on 10′0″ centers.
Floor Supports — Adjustable 30-3/4″ to 44-3/4″ from floor to top of belt. One support supplied at each end of conveyor and at each bed joint.
Take-Up — 6″ long screws located at tail pulley to tighten belt.
Bearings — Sealed, prelubricated with cast iron housings.
Speed Reducer — C-Face mounted heavy duty worm gear reducer.
Motor — 1/2 HP 230/460-3-60 TE motor.
Belt Speed — 60 FPM constant.
Capacity — Maximum load per lineal foot of conveyor: 100 lbs. Not to exceed Load Capacity Chart.
Optional Equipment
Belt — Nitrile (white or black) with smooth top cover, Black PVC rough top, Brown Nitrile rough top. Special belts on application.
Guard Rails — Adjustable channel, continuous channel, or solid steel guard rails available.
Floor Supports — Lower or higher than standard. Castered supports with 4″ diameter or 6″ diameter rigid or swivel casters.
Ceiling Hangers — 1/2″ diameter threaded rods 8 feet long with locking nuts and mounting hardware. Other lengths are available.
Gravity Conveyor Brackets — Adjustable bracket with 1-3/8″ diameter pop-out roller for attaching wheel or roller conveyor.
Nose-Over — Adjustable single or double nose-over provides smooth transfer from incline to horizontal. See the nose-over arrangements drawing in the catalog for details.
Center Drive — Mounted below conveyor bed section. Can be placed most anywhere in conveyor length.
Side Mounted Drive — End drive mounted to side of conveyor section. Specify side. Minimum elevation 9″.
Overhead Drive — End drive mounted above conveyor. Specify clearance required.
Auxiliary Take-Up — Mounted below conveyor bed section. Can be placed most anywhere in conveyor length.
Motor — Single phase, energy efficient, explosion proof, etc. Other HP available.
Belt Speed — Constant and variable belt speeds available.
Electrical Controls — Magnetic starters and push button stations; manual motor starters with overload protection, others.
Applications / Features
- Packing
- Inspecting
- Sorting
- Assembly
- Testing
- Transporting
Online Resources
Confirm the Model Fits Your Application.
Share the product and load data, conveyor dimensions, speed, throughput, controls, layout, and operating conditions. ACSI manufactures the equipment, and our distributors provide system integration and installation.