Model "SBT" Slider Bed Trash Conveyor
Slider Bed Trash Conveyor
ACSI Model SBT is an economical slider bed belt conveyor configured for moving compatible trash, packaging waste, and process scrap away from work or production areas. Full-length six-inch guard rails help contain material on the belt, and the conveyor can be arranged horizontally or on inclines up to the published limit. Belt material, loading points, debris characteristics, and discharge conditions should be confirmed during application review.
12″–48″ belt widths · 6″ guard rails · Incline to 15°
Standard Specifications
Bed — 5-1/2″ deep x 14 gauge powder painted formed steel channel frame. Bed sections are 10 feet and 5 feet long, bolted together with splice plates and floor supports.
Belt — 12″, 18″, 24″, 30″, 36″, 42″ and 48″ wide, black PVC 120, FS top side, brushed bottom side, with clipper lacing.
Guard Rail — 6″ high x 16 gauge formed, powder painted steel on both sides, full length of bed sections.
Underside Guards — Formed 16 gauge pans full length of bed sections, removable, secured with TEK screws.
Tail Pulley — 4″ or 6″ diameter (see chart) crowned. 4″ diameter has 1-3/16″ diameter shaft; 6″ diameter has 1-7/16″ diameter shaft.
Drive Pulley — 4″, 6″ and 8″ diameter crowned and fully lagged. 4″ diameter pulley has 1-3/16″ diameter shaft; 6″ and 8″ diameter pulleys have 1-7/16″ diameter shaft.
Snub Roller — 2″ diameter for 4″ and 6″ diameter pulleys; 2-1/2″ diameter for 8″ diameter pulley.
Return Rollers — 1.9″ diameter placed on 10′ centers.
Floor Supports — Adjustable 30″ to 44″ from floor to top of belt. One floor support provided at each end of conveyor and at each bed joint.
Take-Up — 6″ long screws located at tail pulley to provide belt tension.
Bearings — Sealed, prelubricated with cast iron housings.
Speed Reducer — C-Face mounted heavy duty worm gear reducer.
Motor — 1/2 HP 230/460-3-60 TE motor.
Belt Speed — 60 FPM.
Capacity — 10 pounds per foot maximum live load. See Load Capacity Chart.
Optional Equipment
Guard Rails — 12″, 18″, or 24″ high; vertical or 30 degree flare, for one or both sides.
Floor Supports — Higher than standard supports available to 121″.
Ceiling Hangers — 1/2″ diameter threaded rods, 8 feet long with locking nuts and mounting hardware.
Nose-Over — Fixed single nose-over at 10, 12-1/2 or 15 degrees. Adjustable nose-over roller for belt tracking.
Center Drive — Mounted below conveyor bed section. Can be placed most anywhere in conveyor length.
Auxiliary Belt Take-Up — Mounted below conveyor bed section. Can be placed most anywhere in conveyor length.
Side Mounted End Drive — Mounted to side of conveyor bed. Minimum elevations: 4″ pulley, 7-1/2″; 6″ pulley, 8-1/2″; 8″ pulley, 10-1/2″. Specify side.
Four Pulley Hitch — For transferring material from horizontal to incline section.
Inline Transfer Unit — For transferring material from one horizontal conveyor to another.
Belt — #120 PVC rough top belt for incline applications.
Belt Speed — 45, 75, 90 and 120 FPM. Please specify.
Motor — Single phase, energy efficient, explosion proof, etc. Other HP available.
Applications / Features
- Trash conveying
- Incline to 15°
- Adjustable floor supports
- Economical construction
Online Resources
Confirm the Model Fits Your Application.
Share the product and load data, conveyor dimensions, speed, throughput, controls, layout, and operating conditions. ACSI manufactures the equipment, and our distributors provide system integration and installation.